Specifications
Product Spec Sheet (PDF)Operating Type
Automatic
Evaporation Rate
38 Gallons/Hr.
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).
Dimensions (L/W/H)
100 x 48 x 52″/254 x 122 x 132cm (excluding stack)
Maximum Tank Capacity
225 Gallons/850 Liters
Heating Fluid
150 Gallons/568 Liters
Burner Fuels
Natural Gas or LPG
Electrical Requirement (For Controls)
220V, 30 AMP, Single Phase
Fuel Consumption (Natural Gas)/Hour
400,000 Btu/4 Therms/460 Cu Ft/13 Cu Meter
Weight-Including Heat Transfer Fluid
1900lbs/864kg
Advantages
- Fast Payback/ROI
- Run Dry-Run Dry Without Damage
- Up To 99% Waste Stream Reduction
- Fast Installation
- Easy Operation And Cleaning
- Exhaust Draft Induction Fan
- Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
- Multiple Safety Features
- Wettable Surfaces CRA
- No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
- 5-Year Limited Warranty
Applications
- Parts Washing
- Printing Inks/Dyes
- Vehicle Washes
- Photo Processing
- Metal Fabrication
- Metal Finishing/Plating
- Floor Scrubbing Water
- Marina Bilge Water
- Air Condensation
- Ceramic Coating Wastes
- Compressor Condensate
- Degreasing Operations
- Screw Machine Shops
- Truck/ Car Washes
- Coolants
- Most Aqueous Waste Streams