Specifications
Operating Type
Manual Fill/Run Dry, Automatic Option Available
Evaporation Rate
Up to 1.76 Gallons/hr
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).
Typical Operating Power
5 KW
Dimensions (L/W/H)
25x25x28″/64x64x71cm
(excluding stack)
Weight—Including Heat Transfer Fluid
550 lbs/198kg
Maximum Tank Capacity
16 Gallons/60 Liters
Evaporation Chamber
16x16x16 in/41x41x41 cm
Electrical Requirement
220 Volts, Single Phase, 5KW
Heat Transfer Fluid
11 Gallons
Advantages
- Fast Payback/ROI
- Run Dry-Run Dry Without Damage
- Up To 99% Waste Stream Reduction
- Fast Installation
- Easy Operation And Cleaning
- Exhaust Draft Induction Fan
- Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
- Multiple Safety Features
- Wettable Surfaces
316L Stainless Steel
(Other materials available) - 316L Stainless Steel Tank Standard
AL6XN And Other Corrosion Resistant Materials Available - No Sewer Connection Required
- No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
- 2-Year Limited Warranty
Applications
The DRG 2 is perfect for waste streams from these applications and more:
- Parts Washing
- Printing Inks/Dyes
- Vehicle Washes
- Photo Processing
- Metal Fabrication
- Metal Finishing/Plating
- Floor Scrubbing Water
- Marina Bilge Water
- Air Condensation
- Ceramic Coating Wastes
- Compressor Condensate
- Degreasing Operations
- Screw Machine Shops
- Truck/ Car Washes
- Coolants
- Most Aqueous Waste Streams