Specifications
Models
Manual Fill And Automatic Options
Evaporation Rate
Up to 5.5 Gallons/Hr.
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).
Dimensions (L/W/H)
48 x 37 x 40″ (Excluding stack)
Maximum Tank Capacity
60 Gallons
Heating Fluid
45 Gallons
Electrical Requirement
208, 240 and 480V/3 Phase 15KW
Single phase and other voltages also available, contact Draygon for more information
Weight Including Heat Transfer Fluid
948 lbs.
Heating Chamber
High Tech Insulation
Advantages
- Fast Payback/ROI
- Run Dry-Run Dry Without Damage
- Up To 99% Waste Stream Reduction
- Fast Installation
- Easy Operation And Cleaning
- Exhaust Draft Induction Fan
- Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
- Multiple Safety Features
- Wettable Surfaces
316L Stainless Steel
(Other materials available) - 316L Stainless Steel Tank Standard
AL6XN And Other Corrosion Resistant Materials Available - No Sewer Connection Required
- No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
- 2-Year Limited Warranty
Applications
- Parts Washing
- Printing Inks/Dyes
- Vehicle Washes
- Photo Processing
- Metal Fabrication
- Metal Finishing/Plating
- Floor Scrubbing Water
- Marina Bilge Water
- Air Condensation
- Ceramic Coating Wastes
- Compressor Condensate
- Degreasing Operations
- Screw Machine Shops
- Truck/ Car Washes
- Coolants
- Most Aqueous Waste Streams