Specifications
Operating Type
Gravity displacement type
Performance
Minimum of 99.9% of free droplets 20 micron in size or greater
Design
Our Oil / Water Separators include a tank containing an inlet compartment, separation chamber, sludge chamber, and clean water outlet chamber.
Electrical Requirement
None
Construction
Single wall construction conforming to ASTM A240, type 304 stainless steel. Welding in accor-dance with AWS D1.1 for watertight tanks that will not warp or deform under load.
Corrosion Protection (carbon steel only)
Sandblasting, then interior lined with Tnemec Series 61 liner to 9 mils MDFT; Exterior coated with polyamide epoxy to 6 mils MDFT.
Coalescing Media
HD Q-PAC – minimum of 132 square feet per cubic foot of effective coalescing surface area.
Features
- Fast Payback/ROI
- Fast Installation, No Power Needed
- Reliable Operation, No Moving Parts Or Consumable Wearing Elements
- Low Maintenance, No Filters Or Chemicals
- Easy Cleaning – Removable Vapor Tight Covers
- Unique Technology Cross-fluted design/internal intercon-necting channels for enhanced efficiencies in significantly smaller units. Droplets are intercepted by the corrugated plates as the oil/water mixture flows through the separator, new droplets coalesce with retained droplets, making larger droplets. Enlarged droplets are released and rise to the surface to be decanted into a storage tank. Stokes’ Law calculations, based on a flow of zero velocity, result in a Rey-nold’s number less than 500 to ensure optimum separation.
Applications
Use Draygon Oil / Water Separators for waste streams from these applications and more:
- Parts Washing
- Printing Inks/Dyes
- Vehicle Washes, Parking Lots
- Metal Fabrication/Finishing, Plating, Screw Machine Shops, Ceramic Coating
- Floor Scrubbing Water
- Marina Bilge Water
- Air Condensation
- Storm Water Runoff
- Compressor Condensate
- Degreasing Operations
- Refineries, Refueling Stations, Tank Farms, Utilities, Oil Terminals
- Airports
- Coolant
Included with the system
Design Flow: 1-20 GPM Size 46″ Wide X 70″ High X 96″ Long
2” Inlet/Outlet- FNPT Fitting
(2) 2” Oil Outlet-FNPT Fittings
(2) 2” Vent NPT Fittings and (2) 1” Drain NPT Fittings
Parallel-corrugated plate coalescer designed to remove oil droplets greater than 20 microns with a Reynolds Number of less than 500.
144 square feet of projected plate inclined plates to direct the flow to the surface
Sludge hopper to capture and contain settleable solids.
40-gallon integral oil storage compartment for pump out.
72-gallon effluent compartment for pump out.
Gasketed vapor tight covers for access to chamber compartments.