• Skip to primary navigation
  • Skip to main content
Draygon  Run-Dry Evaporators for Waste Water Treatment
Free Wastewater Treatment Report

Call Draygon Today: 1-585-329-9718

MENUMENU
  • Home
  • Products
    • Thermal Evaporators
    • LSS – Liquid Solid Separator
    • Pretreatment
  • Technology
    • Financial Benefits
    • Environmental Benefits
    • Case Study
  • Uses
    • Applications
    • Industries
  • About
    • About Draygon
    • Industries Served
    • What our customers are saying
  • Contact
Print This Page Print This Page
You are here: Home / Thermal Evaporators / DRG 40 – 38 GPH Wastewater Evaporator
DRG 40 - 38 GPH Wastewater Evaporator
DRG 40 - 38 GPH Wastewater Evaporator - Image 2

DRG 40 – 38 GPH Wastewater Evaporator

38 Gallons/144 Liters/Hour – High Efficiency

Draygon DRG 40 Run Dry Wastewater Evaporators are economical wastewater disposal solutions for aqueous waste steams up to 38 gallons/144 liters per hour. They can be fueled by natural gas or LPG.

Our Run Dry Wastewater Evaporator technology allows the unit to be run dry, without damaging the evaporator, to reduce the waste stream to a fraction of the original volume.

With a maximum tank capacity of 225 Gallons/850 Liters, the DRG 40 wastewater evaporator offers highly efficient waste water disposal with automatic operation.

All DRG wastewater evaporators have as standard CRA (Chloride Resistant Alloy) evaporation chamber wettable surfaces.

Draygon wastewater evaporator technology is used for a wide range of waste water disposal needs, including parts washing, metal fabrication, printing shops, ceramic wastes and vehicle and building washing applications.

The DRG 40 evaporates up to 38 gallons/144 liters per hour and is fueled by a natural gas or LPG burner.

Like the smaller DRG 2 and DRG 7 evaporators, the DRG 40 is a “Run Dry” unit that can be run until dry without damaging the evaporator and completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume.

Options for Draygon Wastewater Evaporators include:

Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.

  • Specifications
  • Advantages
  • Applications

Specifications

Product Spec Sheet (PDF)

Operating Type
Automatic

Evaporation Rate
38 Gallons/Hr.
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).

Dimensions (L/W/H)
100 x 48 x 52″/254 x 122 x 132cm (excluding stack)

Maximum Tank Capacity
225 Gallons/850 Liters

Heating Fluid
150 Gallons/568 Liters

Burner Fuels
Natural Gas or LPG

Electrical Requirement (For Controls)
220V, 30 AMP, Single Phase

Fuel Consumption (Natural Gas)/Hour
400,000 Btu/4 Therms/460 Cu Ft/13 Cu Meter

Weight-Including Heat Transfer Fluid
1900lbs/864kg

Advantages

  • Fast Payback/ROI
  • Run Dry-Run Dry Without Damage
  • Up To 99% Waste Stream Reduction
  • Fast Installation
  • Easy Operation And Cleaning
  • Exhaust Draft Induction Fan
  • Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
  • Multiple Safety Features
  • Wettable Surfaces CRA
  • No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
  • 5-Year Limited Warranty

Applications

  • Parts Washing
  • Printing Inks/Dyes
  • Vehicle Washes
  • Photo Processing
  • Metal Fabrication
  • Metal Finishing/Plating
  • Floor Scrubbing Water
  • Marina Bilge Water
  • Air Condensation
  • Ceramic Coating Wastes
  • Compressor Condensate
  • Degreasing Operations
  • Screw Machine Shops
  • Truck/ Car Washes
  • Coolants
  • Most Aqueous Waste Streams
Draygon Run-Dry Evaporators for Waste Water Treatment

RUNDRY is a trademark of Draygon, LLC. All Rights Reserved.

1-585-329-9718

131 Valenza Loop | N Venice, FL 34275

© 2015-2025 Draygon, LLC, All rights reserved

Site by Industrial Webworks