• Skip to primary navigation
  • Skip to main content
Draygon  Run-Dry Evaporators for Waste Water Treatment
Free Wastewater Treatment Report

Call Draygon Today: 1-585-329-9718

MENUMENU
  • Home
  • Products
    • Thermal Evaporators
    • LSS – Liquid Solid Separator
    • Pretreatment
  • Technology
    • Financial Benefits
    • Environmental Benefits
    • Case Study
  • Uses
    • Applications
    • Industries
  • About
    • About Draygon
    • Industries Served
    • What our customers are saying
  • Contact
Print This Page Print This Page
You are here: Home / Thermal Evaporators / DRG 7 – 5.5 GPH Wastewater Evaporator
DRG 7 - 5.5 GPH Wastewater Evaporator

DRG 7 – 5.5 GPH Wastewater Evaporator

5.5 Gallons/Hour – High Efficiency

Draygon DRG 7 Electric Run Dry Wastewater Evaporators offer economical solutions for aqueous waste water disposal processing up to 5.5 gallons per hour. The DRG 7 Wastewater Evaporator can be run until dry without damaging the unit, and it completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume.

These highly efficient wastewater disposal evaporators are very easy to install and operate and have a fully automatic option that also provides for off-peak electrical rate usage if available in your area.

The DRG 7 Run Dry Wastewater Evaporator 60 gallon/227 liter evaporation chamber is constructed of 316L stainless steel, but can also be fabricated in a selection of other materials depending on the nature of your wastewater disposal stream.

The DRG 7 is a “Run Dry” unit that can be run until dry without damaging the unit and completely evaporates the wastewater to reduce the waste stream to a fraction of the original volume. A fully automatic option is available.

Options for Draygon Wastewater Evaporators include:

Clean out trays, spreader bars, advancing media filters, condensers for water recovery and custom accessories.

  • Specifications
  • Advantages
  • Applications

Specifications

Product Spec Sheet (PDF)

Models
Manual Fill And Automatic Options

Evaporation Rate
Up to 5.5 Gallons/Hr.
The evaporation rates are estimates based air at 70°F for automatic operation, water at boiling point for one hour in batch operation (solids or floating oil build-up in evaporation chamber will reduce rate).

Dimensions (L/W/H)
48 x 37 x 40″ (Excluding stack)

Maximum Tank Capacity
60 Gallons

Heating Fluid
45 Gallons

Electrical Requirement
208, 240 and 480V/3 Phase 15KW

Single phase and other voltages also available, contact Draygon for more information

Weight Including Heat Transfer Fluid
948 lbs.

Heating Chamber
High Tech Insulation

Advantages

  • Fast Payback/ROI
  • Run Dry-Run Dry Without Damage
  • Up To 99% Waste Stream Reduction
  • Fast Installation
  • Easy Operation And Cleaning
  • Exhaust Draft Induction Fan
  • Insulated Double Boiler Design With Heat Transfer Fluid For High Efficiency, Exceptional Thermal Transfer
  • Multiple Safety Features
  • Wettable Surfaces
    316L Stainless Steel
    (Other materials available)
  • 316L Stainless Steel Tank Standard
    AL6XN And Other Corrosion Resistant Materials Available
  • No Sewer Connection Required
  • No NPDES Discharge Permits Needed (always check with local agencies before purchasing)
  • 2-Year Limited Warranty

Applications

  • Parts Washing
  • Printing Inks/Dyes
  • Vehicle Washes
  • Photo Processing
  • Metal Fabrication
  • Metal Finishing/Plating
  • Floor Scrubbing Water
  • Marina Bilge Water
  • Air Condensation
  • Ceramic Coating Wastes
  • Compressor Condensate
  • Degreasing Operations
  • Screw Machine Shops
  • Truck/ Car Washes
  • Coolants
  • Most Aqueous Waste Streams
Draygon Run-Dry Evaporators for Waste Water Treatment

RUNDRY is a trademark of Draygon, LLC. All Rights Reserved.

1-585-329-9718

131 Valenza Loop | N Venice, FL 34275

© 2015-2025 Draygon, LLC, All rights reserved

Site by Industrial Webworks